Microsoft’s latest Windows 10 update has failed to install and users are calling it a “catastrophe.” The company was forced to rollback the update due to widespread crashes.
The “feature update to windows 10 version 21h1 download” is a feature update to windows 10 that failed to install. If you are having the same issue, there are some fixes that you can try.
When you attempt to install the Windows 10 version, commonly known as the “Windows 10 May 2021 update,” you get an error message. Error 0x80080008, 0x80d02002, 0x80242006, or the update downloading operation is blocked. The error “Feature update to Windows 10 version 21H1 fails to install” might be caused by faulty Windows Update components, third-party program conflicts, or other factors. Here you can find every potential solution to the installation issues with Windows 10 Feature Update 2021.
The installation of Windows 10 version 21H1 was unsuccessful.
Cause 01: After downloading the Windows 10 May 2021 update Version 21H1, Windows prompts you to restart your computer to apply the upgrade. The Windows 10 2021 update is not installed once the system restarts, and the following error is shown in the Update history: “Failed to install feature update for Windows 10, version 21H1…” (failure code: 0x80080008)
Cause 02: After checking for new updates, Windows begins to download the May 2021 Update for Windows 10 version 21H1, but it becomes stuck at xx percent (e.g., 85 percent or 99 percent) with error 0x80d02002 during the Downloading Updates procedure.
- To begin, ensure that you have a reliable internet connection. To get updates for Windows from the Microsoft server.
- Run a third-party system optimizer such as Ccleaner to free up disk space by deleting temporary files, system errors, and memory dump files, as well as fixing broken registry errors.
- Use the System File Checker program to ensure that any damaged system files aren’t the source of the problem.
- To repair the system image, use the DISM command DISM.exe /Online/Cleanup-image/Restorehealth.
- Temporarily remove antivirus software and disconnect from any VPN connections that have been set up.
Run the Troubleshooter for Windows Updates.
Windows Update Troubleshooter is a tool made by Microsoft that evaluates your system, specifically the windows update module, and troubleshoots issues. First and foremost, we advise. From the Microsoft website, download the Windows Update Troubleshooter. Run the update troubleshooter and let Windows to diagnose and resolve the issue on its own. The procedure is finished after it has been completed. Try to download and install the Windows update after restarting Windows.
You may also use the methods below to run the built-in Windows update troubleshooter.
- To open Settings, press Windows + I.
- To troubleshoot, go to Updates & Security, then Troubleshoot.
- To access the advanced troubleshooter, go to Windows Update and then Advanced Troubleshooter.
- As indicated in the figure below, find Windows Update and click Run the Troubleshooter.
This will check for issues, prevent feature updates from installing correctly, and attempt to automatically address them. Wait until the troubleshooting procedure is completed, then restart Windows and check for Windows updates again. This time is different. Do you want to be successful? If you still need assistance, please go to the next solution.
Disable Windows Firewall
- Click OK after pressing Windows Key + R and typing Firewall.cpl.
- “Turn Windows Defender Firewall On or Off” will appear.
- Select “Turn off Windows firewall (not recommended)” from the Private network Setting menu.
- Press OK after doing the same for the Public Network Setting.
Note: Once the problem has been repaired, you must activate the Windows Firewall.
Temporarily disable any installed antivirus/malware/adware programs:
Antivirus/Malware/Adware applications may flag Microsoft Windows installation files as spam and prevent them from being installed. Disable it temporarily by going to your vendor’s website. You may reactivate Windows Update when it has completed its installation.
Setting the Time, Region, and Language
Normally, Windows will automatically sync your time to the time zones. It’s possible that having an inaccurate time zone can create issues, such as failing to install Windows updates.
- Open the window’s options.
- Then there’s the date and time, followed by the time and language.
- Make sure your date and time are right.
- If this isn’t the case, uncheck the “set time automatically” settings.
- “Automatically set timezone” is used here.
- Then, under Change date and time, click “Change.”
- Set your watch to the correct time and pick the relevant time zone.
- Disable “Auto-sync time” as well.
- Again, choose English United Kingdom/US from the Region and Language drop-down menus.
Make a clean boot.
If none of these approaches work, we suggest doing a clean boot to remove the effect of third-party software and checking again.
Windows update components should be reset.
If all of the above approaches have failed, resetting Windows update components is a viable option. After that, restart Windows Update and any associated services, as well as delete any old update files. So, the next time you run Windows Update, compel it to download new files from Microsoft’s server.
Open a command prompt as administrator and run the commands listed below one by one.
- wuauserv wuauserv wuauserv wuauserv
- cryptSvc should be stopped on the network.
- halt bits on the internet
- net msiserver halt
The instructions above disable Windows Update and its associated services.
- WindowsSoftwareDistribution: Ren C SoftwareDistribution.old
- C:WindowsSystem32catroot2 Catroot2.old Ren C:WindowsSystem32catroot2 Catroot2.old
The SoftwareDistribution folder, where Windows Update files are stored, is renamed using these two instructions. By renaming this folder, Windows Update generates a new one and downloads new update files from Microsoft’s servers.
- wuauserv wuauserv wuauserv wuauserv
- start cryptSvc.net
- start bits on the internet
- start msiserver with net
The instructions above will re-start the services that were previously disabled.
Restart your computer after closing Command Prompt.
- Now, go to the Windows Settings app and click on the “Advanced” tab.
- Then choose Update & security, followed by Windows Update.
- Check for updates by pressing the Check for Updates button, and see whether Windows 10 version 1809 is available for download.
Use the Update Assistant on Windows 10
If none of the preceding ways worked, go to the Microsoft website and download the “Windows Update Assistant.” Run the upgrade helper, hit the Update Now option, and then follow the on-screen directions to install the update or upgrade to Windows 10 21H1 manually.
Watch This Video-
The “feature update to windows 10 version 21H1 failed to install” is the error that users get when trying to upgrade their version of Windows 10. The error code 0x800f0984 means that the feature update was not installed. Reference: feature update to windows 10 version 21h1 failed to install 0x800f0984.
Frequently Asked Questions
Why is Windows 10 version 21H1 not installing?
A: Windows 10 is currently being rolled out in stages. If you are encountering issues while installing this new version, it might be because your computer is too old and cant handle the upgrade process.
How do I fix 21H1 update?
A: The 21H1 update has been reverted to fix the issue, but you should be able to redownload it and install it again.
Why is Windows 10 update failing to install?
A: You may need a few more hardware resources to enable the update. Please try out these steps and let me know if you are still facing any issues after following them:
1) Go to Start Menu > Settings > Update & Security > Windows Update and select Advanced options
2) Select Choose how updates get delivered from this drop-down menu
3) Check the box that says Choose whether or not updates can be installed automatically (recommended)
- windows 10 feature update failed to install
- windows 10 feature update 2004 failed to install
- windows 10 21h1 update problems
- feature update to windows 10 version 2004 error 0x8024a205
- windows 10 20h2 will not update